Na sklade Horúci produkt
REL-SR-24DC/2X21/FG X
REL-SR-24DC/2X21/FG X 1473564 PHOENIX CONTACT Safety relay with forced conduction contacts according to DIN ..
$0.00
USD
3774 na sklade
Kľúčové špecifikácie
:
58 W (48 V DC)
Depth:
26.3 mm
Width:
12.6 mm
Height:
29 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 58 W (48 V DC) | |
| Depth | 26.3 mm |
| Width | 12.6 mm |
| Height | 29 mm |
| General | The outputs are not suitable for switching different outer conductors. |
| Altitude | ≤ 2000 m |
| Insulation | Basic insulation |
| Application | Forcibly guided contacts |
| Coil voltage | 24 V DC |
| Typ produktu | Single relay |
| Mounting type | Plug-in mounting |
| Operating mode | 100% operating factor |
| Status display | Yellow LED |
| Test voltage () | 1.5 kVrms(50 Hz, 1 min.) |
| Contact material | AgSnO |
| Drive (polarity) | non-polarized |
| Pollution degree | 2 |
| Cross section AWG | (converted acc. to IEC) |
| Mounting position | any |
| Drive and function | monostable |
| Protective circuit | Freewheeling diode |
| Input voltage range | 19.2 V DC ... 26.4 V DC |
| Rated surge voltage | 4 kV |
| Overvoltage category | III |
| Typical release time | 10 ms |
| Assembly instructions | in rows with zero spacing |
| Standards/regulations | EN 61810-1 |
| Typical response time | 15 ms |
| Contact switching type | 2 changeover contacts, forcibly actuated |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 107cycles |
| Nominal input voltage UN | 24 V DC |
| Rated insulation voltage | 250 V AC |
| Maximum switching voltage | 250 V AC/DC |
| Limiting continuous current | 6 A |
| Typical input current at UN | 30 mA |
| Degree of protection (Relay) | RT II (Relay) |
| Input power dissipation for UN | 0.72 W |
| Test voltage (Winding/contact) | 4 kVrms(50 Hz, 1 min.) |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
| Input voltage range in reference to UN | see diagram |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Degree of protection (Installation location) | IP54 (Installation location) |
| Maximum power dissipation for nominal condition | 0.7 W |
| Force-guided contacts in accordance with EN 61810-3 | Type B |
| Test voltage (Changeover contact/changeover contact) | 2.5 kVrms(50 Hz, 1 min.) |
Popis produktu
Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 changeover contacts. The requirements for type A in accordance with DIN EN 61810-3 are satisfied if
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
