Čas služby: pondelok až piatok 9:00-18:00
REL-FO/LRC-120AC/2X21/MS - REL-FO/LRC-120AC/2X21/MS 1308316 PHOENIX CONTACT Plug-in miniature relay with mechanical switching position ..
Na sklade Horúci produkt

REL-FO/LRC-120AC/2X21/MS

REL-FO/LRC-120AC/2X21/MS 1308316 PHOENIX CONTACT Plug-in miniature relay with mechanical switching position ..

$2.03 USD
4972 na sklade
Kľúčové špecifikácie
: 240 W (30 V DC)
Depth: 34 mm
Width: 13 mm
Height: 31.1 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
240 W (30 V DC)
Depth 34 mm
Width 13 mm
Height 31.1 mm
General Do not use to separate SELV/PELV circuits from other circuits, because safe isolation is not guaranteed. (applies to the optocoupler variants)
Altitude ≤ 2000 m
Insulation Basic insulation
Relay type Electromechanical relay
Typ produktu Single relay
Operating mode 100% operating factor
Product family ESSENTIAL edition
Status display Yellow LED
Coil resistance 6400 Ω ±10 %
Mains frequency 50/60 Hz
Test voltage () 1 kVrms(50 Hz, 1 min., open contact)
Contact material AgSnO
Drive (polarity) non-polarized
Pollution degree 3
Connection method FASTON connection
Cross section AWG (converted acc. to IEC)
Mounting position any
Drive and function monostable
Protective circuit RC element
Input voltage range 96 V AC ... 132 V AC
Rated surge voltage 2.5 kV
Overvoltage category II
Standards/regulations IEC 61810-1
Typical response time 2 ms ... 15 ms
Contact switching type 2 changeover contacts
Maximum inrush current 16 A (20 ms, N/O contacts)
Type of switch contact Single contact
Inrush current, minimum 10 mA (5 V)
Mechanical service life approx. 3x 107cycles
Nominal input voltage UN 120 V AC
Rated insulation voltage 250 V AC
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (10 mA)
Typical release time range 5 ms ... 20 ms
Limiting continuous current 8 A
Typical input current at UN 10 mA (50 Hz)
Degree of protection (Relay) RT II (Relay)
Input power dissipation for UN 1.2 W
Test voltage (Winding/contact) 5 kVrms(50 Hz, 1 min., winding/contact)
Ambient temperature (operation) -40 °C ... 70 °C
Interrupting rating (ohmic load) max. 192 W (24 V DC)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Degree of protection (Installation location) IP54 (Installation location)
Maximum power dissipation for nominal condition 1 W
Test voltage (Changeover contact/changeover contact) 3 kVrms(50 Hz, 1 min., changeover contact/changeover contact)

Popis produktu

Plug-in miniature relay with mechanical switching position indicator, FASTON connection, 2 changeover contacts, status display: Yellow LED, RC element, Input voltage: 120 V AC
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top