Na sklade Horúci produkt
REL-MR-12DC/21-21AU
REL-MR- 12DC/21-21AU 2961299 PHOENIX CONTACT Single relay
$0.00
USD
4443 na sklade
Kľúčové špecifikácie
:
36 V DC
Note:
the following values are applicable if a gold layer is destroyed
Color:
white (RAL 9010)
Depth:
15.7 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 36 V DC | |
| Note | the following values are applicable if a gold layer is destroyed |
| Color | white (RAL 9010) |
| Depth | 15.7 mm |
| Width | 12.7 mm |
| Height | 29 mm |
| Insulation | Basic insulation |
| Typ produktu | Single relay |
| Assembly note | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
| Identification | ISA-S71.04. G3 Harsh Group |
| Operating mode | 100% operating factor |
| Coil resistance | 360 Ω ±10 % (at 20 °C) |
| Article revision | 02 |
| Contact material | AgNi, hard gold-plated |
| Drive (polarity) | non-polarized |
| Pollution degree | 3 |
| Connection method | Plug / solder connection |
| Mounting position | any |
| Drive and function | monostable |
| Switching capacity | 2 A (at 24 V, DC13) |
| Dimensional drawing | |
| Input voltage range | 7.8 V DC ... 29.76 V DC |
| Degree of protection | RT III |
| Overvoltage category | III |
| Typical release time | 3 ms |
| Standards/regulations | IEC 60664 |
| Typical response time | 7 ms |
| Contact switching type | 2 changeover contacts |
| Maximum inrush current | 50 mA |
| Min. switching current | 1 mA (at 24 V) |
| Type of switch contact | Single contact |
| Mechanical service life | 3x 107cycles |
| Service life electrical | see diagram |
| Switching capacity min. | 0.12 W |
| Nominal input voltage UN | 12 V DC |
| Maximum switching voltage | 30 V AC |
| Minimum switching voltage | 100 mV (at 10 mA) |
| Limiting continuous current | 50 mA |
| Typical input current at UN | 33 mA |
| Date of last data management | 02.05.2024 |
| Test voltage (Contact/contact) | 2.5 kV AC (50 Hz, 1 min., contact/contact) |
| Test voltage (Winding/contact) | 5 kV AC (50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum power dissipation for nominal condition | 0.4 W |
Popis produktu
Plug-in miniature power relay, with multi-layer gold contact, 2 switched contacts, input voltage 12 V DC
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
