Na sklade Horúci produkt
DEK-OV-24DC/ 24DC/ 3/AKT
DEK-OV- 24DC/ 24DC/ 3/AKT 2964296 PHOENIX CONTACT Solid-state relay terminal block
$0.00
USD
3589 na sklade
Kľúčové špecifikácie
:
Surge protection
Color:
green (RAL 6021)
Depth:
56 mm
Width:
6.2 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| Surge protection | |
| Color | green (RAL 6021) |
| Depth | 56 mm |
| Width | 6.2 mm |
| Height | 80 mm |
| Insulation | Basic insulation |
| Application | Output function |
| Typ produktu | Solid-state relay module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| Output circuit | 2-conductor, floating |
| Product family | DEK |
| Article revision | 12 |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Tightening torque | 0.5 Nm |
| Protective circuit | Reverse polarity protection |
| Input voltage range | 19.2 V DC ... 28.8 V DC |
| Note on application | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Output voltage range | 3 V DC ... 30 V DC |
| Overvoltage category | III |
| Standards/regulations | IEC 60947-5-1 |
| Typical response time | 40 µs |
| Typical turn-off time | 200 µs |
| Contact switching type | 1 N/O contact |
| Transmission frequency | 300 Hz |
| Design of digital output | electronic |
| Nominal input voltage UN | 24 V DC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 14 |
| Limiting continuous current | 3 A (see derating curve) |
| Test voltage (Input/output) | 2.5 kV AC (Input/output) |
| Typical input current at UN | 7 mA |
| Date of last data management | 03.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Maximum power dissipation for nominal condition | 0.17 W |
| Voltage drop at max. limiting continuous current | ≤ 0.2 V |
| Switching threshold "0" signal in reference to UN | ≤ 0.4 |
| Switching threshold "1" signal in reference to UN | ≥ 0.8 |
Popis produktu
Solid state power relay terminal for actuators, input: 24 V DC, output: 3-30 V DC/3 A, terminal width 6.2 mm
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
