Na sklade Horúci produkt
DEK-OE-230AC/ 48DC/100
DEK-OE-230AC/ 48DC/100 2940210 PHOENIX CONTACT Solid-state relay terminal block
$0.00
USD
4244 na sklade
Kľúčové špecifikácie
:
Surge protection
Color:
green (RAL 6021)
Depth:
56 mm
Width:
6.2 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| Surge protection | |
| Color | green (RAL 6021) |
| Depth | 56 mm |
| Width | 6.2 mm |
| Height | 80 mm |
| Insulation | Basic insulation |
| Application | Output function |
| Typ produktu | Solid-state relay module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| Output circuit | 2-conductor floating, 3-conductor ground-referenced |
| Product family | DEK |
| Output resistor | approx. 22 kΩ (for 3-conductor operation) |
| Article revision | 22 |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Tightening torque | 0.5 Nm |
| Order information: | The housing is open on one side. The appropriate cover is D-DEK 1,5 GN (2716949). |
| Protective circuit | Reverse polarity protection |
| Input voltage range | 207 V AC ... 253 V AC |
| Note on application | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Output voltage range | 3 V DC ... 48 V DC |
| Overvoltage category | III |
| Standards/regulations | IEC 60947-5-1 |
| Typical response time | 10 ms |
| Typical turn-off time | 20 ms |
| Contact switching type | 1 N/O contact |
| Transmission frequency | 3 Hz |
| Design of digital output | electronic |
| Nominal input voltage UN | 230 V AC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 14 |
| Limiting continuous current | 100 mA |
| Test voltage (Input/output) | 2.5 kV AC (Input/output) |
| Typical input current at UN | 2.5 mA |
| Date of last data management | 03.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Switching threshold "1" signal voltage | ≥ 207 V |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Switching threshold "0" signal, voltage | ≤ 92 V |
| Voltage drop at max. limiting continuous current | ≤ 0.9 V |
| Switching threshold "0" signal in reference to UN | ≤ 0.4 |
| Switching threshold "1" signal in reference to UN | ≥ 0.9 |
Popis produktu
Input solid-state relay terminal, input: 230 V AC, output: 3 - 48 V DC/ 100 mA, terminal width 6.2 mm
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
