Na sklade Horúci produkt
VAL-US-48/40/1+0-FM
VAL-US-48/40/1+0-FM 2910343 PHOENIX CONTACT Type 2 surge protection device
$0.00
USD
3808 na sklade
Kľúčové špecifikácie
GTIN:
4055626444857
Note:
Made to Order (non-returnable)
Orderkey:
2910343
(General):
≤ 0.275 kV (at 3 kA)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| GTIN | 4055626444857 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2910343 |
| (General) | ≤ 0.275 kV (at 3 kA) |
| Packing unit | 1 pc |
| Country of origin | US (United States) |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT |
| (Protective circuit) | 1 A DC |
| (UL connection data) | EN 61643-11 2012 |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | jet black RAL 9005 |
| Response time tA (General) | ≤ 25 ns |
| SPD Type (Connection data) | 4CA |
| Depth (Key Commercial Data) | 65.5 mm |
| Width (Key Commercial Data) | 17.8 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 96.8 mm |
| Nominal voltage UN (General) | 60 V DC ±10 % |
| (Indicator/remote signaling) | 4.5 Nm (25 mm² ... 35 mm²) |
| Residual current IPE (General) | ≤ 0.45 mA |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 80 A |
| Residual voltage Ures (General) | ≤ 0.55 kV (at In) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Nominal voltage (Connection data) | 60 V DC |
| Screw thread (Protective circuit) | M2 |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Mode of protection (Connection data) | (DC+) - (DC-) |
| Weight per Piece (excluding packing) | 106.000 g |
| Housing material (Ambient conditions) | PA 6.6 |
| Operating current (UL specifications) | 1 A AC |
| Operating voltage (UL specifications) | 125 V AC |
| Stripping length (Protective circuit) | 7 mm |
| Tightening torque (UL specifications) | 2 lbf-in. ... 4 lbf-in. |
| Voltage protection level Up (General) | ≤ 0.55 kV |
| Connection method (Protective circuit) | Screw connection |
| Horizontal pitch (Key Commercial Data) | 1 Div. |
| Operating current (Protective circuit) | 5 mA AC ... 1.5 A AC |
| Operating voltage (Protective circuit) | 5 V AC ... 250 V AC |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Maximum continuous voltage UC (General) | 100 V DC |
| Mode of protection (Ambient conditions) | (DC+) - (DC-) |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 1 |
| Screw thread (Indicator/remote signaling) | M5 |
| Standards/regulations (UL connection data) | IEC 61643-11 2011 |
| Power distribution system (Connection data) | DC |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | DC |
| IEC test classification (Ambient conditions) | II |
| Short-circuit current rating ISCCR (General) | 5 kA |
| Max. backup fuse with branch wiring (General) | 125 A (gG) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Screw connection |
| Nominal discharge current In (Connection data) | 20 kA |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm (1,5 mm² ... 16 mm²) |
| Conductor cross section AWG (UL specifications) | 30 ... 14 |
| Measured limiting voltage MLV (Connection data) | 720 V |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Nominal discharge current In(8/20) µs (General) | 15 kA |
| Maximum Surge Current per Phase (Connection data) | 40 kA |
| Tightening torque (UL indicator/remote signaling) | 30 lbf-in. |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Max. backup fuse with V-type through wiring (General) | 80 A (gG) |
| Conductor cross section AWG (Indicator/remote signaling) | 15 ... 2 |
| Conductor cross section solid (Indicator/remote signaling) | 1.5 mm² ... 35 mm² |
| Conductor cross section AWG (UL indicator/remote signaling) | 10 ... 2 |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Maximum continuous operating voltage MCOV (Connection data) | 100 V DC |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 25 mm² |
Popis produktu
1-channel surge protection device with remote indication contact, for 48 V DC.
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
