Na sklade Horúci produkt
VAL-SEC-T2-3S-350/40
VAL-SEC-T2-3S-350/40 2909637 PHOENIX CONTACT Type 2 surge arrester
$0.00
USD
3205 na sklade
Kľúčové špecifikácie
GTIN:
4055626378220
Orderkey:
2909637
(General):
63 A (gG / TWIN ferrule 2x 10mm²)
Catalog page:
Page 45 (C-4-2017)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| GTIN | 4055626378220 |
| Orderkey | 2909637 |
| (General) | 63 A (gG / TWIN ferrule 2x 10mm²) |
| Catalog page | Page 45 (C-4-2017) |
| Packing unit | 1 pc |
| Country of origin | DE (Germany) |
| (Connection data) | EN 61643-11 2012 |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | light grey RAL 7035 |
| Depth (Key Commercial Data) | 74.5 mm (incl. DIN rail 7.5 mm) |
| Width (Key Commercial Data) | 49.2 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 89.9 mm |
| Nominal voltage UN (General) | 240/415 V AC (TN-S) |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Residual current IPE (General) | ≤ 1 µA |
| Shock (operation) (Dimensions) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 40 A (Biconnect M4 fork-type cable lug 6 mm²) |
| Response time tA(L-N) (General) | ≤ 25 ns |
| Response time tA(L-PE) (General) | ≤ 100 ns |
| Response time tA(N-PE) (General) | ≤ 100 ns |
| Degree of protection (Dimensions) | IP20 |
| Screw thread (Protective circuit) | M5 |
| TOV behavior at UT(L-N) (General) | 415 V AC (5 s / withstand mode) |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| TOV behavior at UT(N-PE) (General) | 1200 V AC (200 ms / withstand mode) |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Residual voltage Ures(L-N) (General) | ≤ 1.5 kV (at In) |
| Weight per Piece (excluding packing) | 368.230 g |
| Housing material (Ambient conditions) | PA 6.6-FR 20% GF |
| Residual voltage Ures(N-PE) (General) | ≤ 0.7 kV (at In) |
| Stripping length (Protective circuit) | 16 mm |
| Connection method (Protective circuit) | Fork-type cable lug |
| Horizontal pitch (Key Commercial Data) | 2.7 Div. |
| Tightening torque (Protective circuit) | 4.5 Nm |
| Mode of protection (Ambient conditions) | L-N |
| Standards/regulations (Connection data) | IEC 61643-11 2011 |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 4 |
| Voltage protection level Up(L-N) (General) | ≤ 1.5 kV |
| Voltage protection level Up(L-PE) (General) | ≤ 1.9 kV |
| Voltage protection level Up(N-PE) (General) | ≤ 1.5 kV |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN-S |
| IEC test classification (Ambient conditions) | II |
| Short-circuit current rating ISCCR (General) | 25 kA (in case of 315 A gG backup fuse) |
| Max. backup fuse with branch wiring (General) | 315 A (gG) |
| Maximum continuous voltage UC(N-PE) (General) | 264 V AC |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Conductor cross section AWG (Protective circuit) | 12 ... 4 |
| Conductor cross section solid (Protective circuit) | 2.5 mm² ... 25 mm² |
| Follow current interrupt rating Ifi(N-PE) (General) | 100 A (264 V AC) |
| Surge protection fault message (Ambient conditions) | optical |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 1.5 mm² ... 6 mm² |
| Max. backup fuse with V-type through wiring (General) | 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) |
| Maximum continuous operating voltage UC(L-N) (General) | 350 V AC |
| Nominal discharge current In(8/20) µs (L-N) (General) | 20 kA |
| Maximum continuous operating voltage UC(L-PE) (General) | 350 V AC |
| Nominal discharge current In(8/20) µs (L-PE) (General) | 20 kA |
| Nominal discharge current In(8/20) µs (N-PE) (General) | 40 kA |
| Maximum discharge current Imax(8/20) µs (L-N) (General) | 40 kA |
| Maximum discharge current Imax(8/20) µs (L-PE) (General) | 40 kA |
| Maximum discharge current Imax(8/20) µs (N-PE) (General) | 80 kA |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
Popis produktu
Plug-in surge protection device, according to type 2/class II, for three-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE). With a shunt capacity of 40 kA acco
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
