Čas služby: pondelok až piatok 9:00-18:00
VAL-MS-T1/T2 1000DCPV-UD-ST - VAL-MS-T1/T2 1000DCPV-UD-ST 2801231 PHOENIX CONTACT Type 1/2 surge protection plug
Na sklade Horúci produkt

VAL-MS-T1/T2 1000DCPV-UD-ST

VAL-MS-T1/T2 1000DCPV-UD-ST 2801231 PHOENIX CONTACT Type 1/2 surge protection plug

$0.00 USD
4429 na sklade
Kľúčové špecifikácie
GTIN: 4046356749220
Note: Made to Order (non-returnable)
Orderkey: 2801231
(General): ≤ 2.4 kV (at 40 kA)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
GTIN 4046356749220
Note Made to Order (non-returnable)
Orderkey 2801231
(General) ≤ 2.4 kV (at 40 kA)
Catalog page Page 59 (C-6-2015)
Packing unit 1 pc
Country of origin DE (Germany)
Custom tariff number 85363030
(Ambient conditions) PV T2
Altitude (Dimensions) ≤ 2000 m (amsl (above mean sea level))
Type (Ambient conditions) Male
Color (Ambient conditions) jet black RAL 9005
Response time tA (General) ≤ 25 ns
SPD Type (Connection data) 4CA
Depth (Key Commercial Data) 55.3 mm
Width (Key Commercial Data) 17.5 mm
Height (Key Commercial Data) 52.4 mm
Shock (operation) (Dimensions) 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Residual voltage Ures (General) ≤ 1.8 kV (at In)
Degree of protection (Dimensions) IP20
Nominal voltage (Connection data) 875 V DC
Accessibility (Ambient conditions) Accessible
Mounting type (Ambient conditions) on base element
Vibration (operation) (Dimensions) 7.5g (5-500 Hz/2.5 h/XYZ)
Insulation resistance Riso (General) > 5 GΩ (at 500 V DC)
Mode of protection (Connection data) (L+) - G
Weight per Piece (excluding packing) 94.700 g
Housing material (Ambient conditions) PA 6.6-FR
Voltage protection level Up (General) ≤ 1.8 kV
Horizontal pitch (Key Commercial Data) 1 Div.
Standby power consumption PC (General) ≤ 25 mVA
Degree of pollution (Ambient conditions) 2
Number of positions (Ambient conditions) 1
SPD failure behavior (Ambient conditions) OCM (Open-circuit mode)
Standards/regulations (UL specifications) EN 50539-11 2013
Installation location (Ambient conditions) Inside
Continuous operating current ICPV (General) < 20 µA
Power distribution system (Connection data) Single phase
Ambient temperature (operation) (Dimensions) -40 °C ... 80 °C
IEC test classification (Ambient conditions) PV T1
Short-circuit current rating ISCPV (General) 1000 A
Permissible humidity (operation) (Dimensions) 5 % ... 95 %
Connection method (Indicator/remote signaling) pluggable
Nominal discharge current (8/20) µs (General) 15 kA
Maximum discharge current Imax(8/20) µs (General) 40 kA
Maximum continuous operating voltage UCPV (General) 525 V DC
Surge protection fault message (Ambient conditions) optical
Ambient temperature (storage/transport) (Dimensions) -40 °C ... 80 °C
Nominal discharge current In(L+) - G (Connection data) 20 kA
Impulse discharge current (10/350) µs, charge (General) 2.5 As
Measured limiting voltage MLV (L+) - G (Connection data) 1900 V
Flammability rating according to UL 94 (Ambient conditions) V-0
Impulse discharge current (10/350) µs, peak value limp (General) 5 kA
Impulse discharge current (10/350) µs, specific energy (General) 6.25 kJ/Ω
Installation location of the disconnect device (Ambient conditions) Internal
Max. required back-up fuse (Protective circuit DC voltage side (DC)) not required
Maximum continuous operating voltage MCOV (L+) - G (Connection data) 1050 V DC

Popis produktu

Protec. Spare plug-in for PV arrester combinations from the VAL-MS-T1/T2 1000DC-PV product line-...
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top