Na sklade Horúci produkt
TRIO3-PS/1AC/24DC/10/4C/IOL
1252696 PHOENIX CONTACT TRIO3-PS/1AC/24DC/10/4C/IOL Power Supply
$0.00
USD
4527 na sklade
Kľúčové špecifikácie
:
115 V AC ... 240 V AC ±10 % (UL)
Color:
red, yellow, green (multicolor LED)
Depth:
132 mm
I/O/S:
asymmetrical
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 115 V AC ... 240 V AC ±10 % (UL) | |
| Color | red, yellow, green (multicolor LED) |
| Depth | 132 mm |
| I/O/S | asymmetrical |
| Input | asymmetrical 2 kV (Test Level 3) |
| Width | 68 mm |
| rigid | 0.2 mm² ... 4 mm² |
| Height | 135 mm |
| Output | asymmetrical 2 kV (Test Level 3) |
| Signal | asymmetrical 1 kV (Test Level 3) |
| LED off | Supply voltage input AC not present (Off) |
| Voltage | 10 V (Test Level 3) |
| Comments | Criterion B |
| Derating | < 100 V AC (1 %/V) |
| Function | Visual operating state display |
| Position | 3.x |
| flexible | 0.2 mm² ... 2.5 mm² |
| Device ID | 040114hex/262420dez |
| Frequency | 50 Hz |
| Interface | IO-Link |
| Rise time | ≤ 1 s (UOut= 10 % ... 90 %) |
| Vendor ID | 00B0hex/ 176dez |
| Cycle time | 40 ms |
| EN 61010-1 | III (≤ 2000 m) |
| Efficiency | typ. 94.5 % (120 V AC) |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Criterion C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| Voltage dip | 70 % |
| rigid (AWG) | 24 ... 12 (Cu) |
| Crest factor | typ. 1.75 (120 V AC) |
| Hood version | Polycarbonate |
| Typ produktu | Power supply |
| Mounting type | DIN rail mounting |
| No-load proof | yes |
| Specification | V1.1 |
| Identification | UL/C-UL Listed UL 61010-1 |
| Inrush current | < 17 A (25 °C) |
| Noise emission | EN 55016 |
| Noise immunity | Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial) |
| Product family | TRIO POWER |
| Additional text | Class 3 |
| EN 61010-2-201 | III (≤ 2000 m) |
| Frequency range | 0 kHz ... 2 kHz |
| No. of channels | 4 |
| Residual ripple | typ. 50 mVPP(with nominal values) |
| State condition | UOut> 21 V DC and IOutN (Contact closed) |
| Discharge in air | 8 kV (Test Level 3) |
| Maximum altitude | ≤ 5000 m (> 2000 m, Derating: 10 %/1000 m) |
| Number of phases | 1.00 |
| Position marking | 3.1 (13), 3.2 (14) |
| Protection class | I |
| Stripping length | 10 mm (rigid/flexible) |
| Connection method | Push-in connection |
| Contact discharge | 6 kV (Test Level 3) |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| Device mains fuse | 6.3 A internal (device protection) |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| Number of periods | 25 periods |
| Output power (PN) | 240 W |
| Shock (operation) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| Switching voltage | max. 30 V DC (SELV) |
| Protective circuit | Transient protection; Varistor |
| Transmission speed | 38.4 kbps (COM2) |
| Types of signaling | LED DC OK – signal state operation (UN= 24 V DC, IOut= IN) |
| Current consumption | 2.6 A (100 V AC) |
| Degree of pollution | 2 |
| Input voltage range | 100 V AC ... 240 V AC -15 % ... +10 % |
| Short-circuit-proof | yes |
| Test field strength | 10 V/m (Test Level 3) |
| Connection in series | No |
| Degree of protection | IP20 |
| Frequency range (fN) | 50 Hz ... 60 Hz ±10 % |
| Mains buffering time | typ. 27 ms (120 V AC) |
| Max. capacitive load | 30 mF |
| Number of interfaces | 1 |
| Side element version | Aluminum |
| Standard designation | Safety of power supply units up to 1100 V (insulation distances) |
| Transmission physics | 3-wire, standard industrial cable |
| Assembly instructions | alignable: 0 mm horizontally, 30 mm vertically |
| Interference emission | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| LED on (green), DC OK | UOut> 21 V DC and IOutN (On (green), DC OK) |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Standards/regulations | EN 61000-3-2 |
| Vibration (operation) | 10 Hz ... 50 Hz, amplitude ±0.2 mm (IEC 60068-2-6) |
| Amount of process data | 6 Byte (Input data) |
| Connection in parallel | no |
| Nominal output voltage | 24 V DC |
| Power factor (cos phi) | 0.95 (230 V AC) |
| Discharge current to PE | < 3.5 mA |
| Conducted noise emission | EN 55016 |
| Standards/specifications | DIN EN 61558-2-16 |
| Current carrying capacity | max. 100 mA |
| LED on (flashing red) OVP | UOUT> OVP (Over voltage protection) (On (flashing red)) |
| Switch contact (floating) | OptoMOS |
| Dynamic Boost (IDyn.Boost) | max. 15 A (5 s) |
| Integrated fuse protection | yes |
| MTBF (IEC 61709, SN 29500) | > 1300000 h (25 °C) |
| Output power (PDyn. Boost) | max. 360 W (5 s) |
| Feedback voltage resistance | ≤ 35 V DC |
| LED on (yellow), IOut > 90% | UOut> 21 V DC and IOut> 0.9 x IN(On (yellow), IOut> 90% ) |
| Nominal current per channel | 1 A |
| Nominal input voltage range | 100 V AC ... 240 V AC |
| Nominal output current (IN) | 10 A |
| Supply system configuration | Star network (TN, TT, IT (PE)) |
| Power loss nominal load max. | < 12 W (230 V AC) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Inrush current integral (I2t) | < 0.5 A2s |
| Typical national grid voltage | 120 V AC |
| Voltage type of supply voltage | AC |
| Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
| Insulation voltage input/output | 3 kV AC (type test) |
| Switch-on delay of the channels | 100 ms |
| Maximum no-load power dissipation | < 1.3 W (230 V AC) |
| Minimum no-load power dissipation | < 1.2 W (120 V AC) |
| Environmental protection directive | RoHS Directive 2011/65/EU |
| Flammability rating according to UL 94 | V0 (Housing, terminal blocks) |
| Minimum nominal load power dissipation | < 14.5 W (120 V AC) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristic B, C, D, K or comparable) |
| Installation distance right/left (active) | 15 mm / 15 mm |
| flexible with ferrule with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Ambient temperature (start-up type tested) | -40 °C |
| Installation distance right/left (passive) | 0 mm / 0 mm (≤ 40 °C) |
| Setting range of the output voltage (USet) | 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) |
| Waiting time after switch off of a channel | 5 s |
| flexible with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Protection against overvoltage at the output (OVP) | ≤ 35 V DC |
Popis produktu
Primary-switched power supply unit, TRIO POWER, Push-in connection, 4-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ..
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
