Na sklade Horúci produkt
SPTA-THR 1,5/ 6-3,81BDWH:-5R44
SPTA-THR 1,5/ 6-3,81BDWH:-5R44 1531582 PHOENIX CONTACT PCB terminal, nominal current: 13.5 A, nominal voltag..
$2.75
USD
3669 na sklade
Kľúčové špecifikácie
:
0.34 mm² ... 1.5 mm² (Push-in connection)
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:
3.81 mm
Result:
Test passed
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 0.34 mm² ... 1.5 mm² (Push-in connection) | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 3.81 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| ESD level | (D) electrostatically conductive |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 23.65 mm |
| Height [h] | 15.07 mm |
| Length [l] | 11.6 mm |
| Pin layout | Linear pinning |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Product line | COMBICON Terminals S |
| Typ produktu | Printed circuit board terminal |
| Hole diameter | 1.1 mm |
| Mounting type | THR soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Product family | SPTA 1,5/..-THR |
| [W] tape width | 44 mm |
| Color (Housing) | black (9005) |
| Contact material | Cu alloy |
| Installed height | 12.47 mm |
| Stripping length | 10 mm |
| Time of exposure | 5 s |
| Connection method | Push-in spring connection |
| Type of packaging | 44 mm wide tape |
| [A] coil diameter | 330 mm |
| Nominal current IN | 17.5 A |
| Nominal voltage UN | 160 V |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Insulating material | LCP |
| Number of positions | 6 |
| Outer packaging type | Transparent-Bag |
| Rated voltage (II/2) | 250 V |
| Assembly instruction: | This item is not suitable for PCB cleaning with liquids. |
| Nominal cross section | 1.5 mm² |
| Rated voltage (III/2) | 160 V |
| Rated voltage (III/3) | 160 V |
| Solder pin length [P] | 2.6 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | hot-dip tin-plated |
| Color (Actuating element) | signal white (9003) |
| Insulating material group | IIIa |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 175 |
| Rated surge voltage (II/2) | 2.5 kV |
| Rated surge voltage (III/2) | 2.5 kV |
| Rated surge voltage (III/3) | 2.5 kV |
| [W2] coil overall dimension | 50.4 mm |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² (Conductor connection with open terminal point) |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 250 V |
| Conductor cross section flexible | 0.5 mm² ... 1.5 mm² |
| Rated insulation voltage (III/2) | 160 V |
| Rated insulation voltage (III/3) | 160 V |
| minimum creepage distance (II/2) | 2.5 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 1.6 mm |
| minimum creepage distance (III/3) | 2.5 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 175 |
| Metal surface soldering area (top layer) | Tin (2 - 4 µm Sn) |
| Metal surface terminal point (top layer) | Tin (2 - 4 µm Sn) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| minimum clearance value - non-homogenous field (II/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 1.5 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 0.75 mm² |
Popis produktu
PCB terminal block, nominal current: 17.5 A, rated voltage (III/2): 160 V, nominal cross section: 1.5 mm2, number of rows: 1, number of positions per row: 6, product range: SPTA 1,5/..-THR, pitch: 3.8
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
