Na sklade Horúci produkt
SMKDS 1/ 7-3,5 GY
SMKDS 1/ 7-3,5 GY 1567038 PHOENIX CONTACT Terminal block for printed circuit board, number of poles per row:..
$2.85
USD
3546 na sklade
Kľúčové špecifikácie
:
0.14 mm² / flexible / > 10 N
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:
PC termination block
Pitch:
3.5 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 0.14 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC termination block |
| Pitch | 3.5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 25 mm |
| Height [h] | 13 mm |
| Length [l] | 10 mm |
| Pin layout | Linear pinning |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Product line | COMBICON Terminals S |
| Typ produktu | Printed circuit board terminal |
| Hole diameter | 1.1 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Pin dimensions | 0.5 x 0.9 mm |
| Product family | SMKDS 1 |
| Color (Housing) | gray (7042) |
| Contact material | Cu alloy |
| Installed height | 9.5 mm |
| Stripping length | 5 mm |
| Time of exposure | 5 s |
| Connection method | Screw connection with tension sleeve |
| Tightening torque | 0.22 Nm ... 0.25 Nm |
| Type of packaging | packed in cardboard |
| Nominal current IN | 10 A |
| Nominal voltage UN | 200 V |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Insulating material | PA |
| Note on application | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Number of positions | 7 |
| Rated voltage (II/2) | 400 V |
| Drive form screw head | Slotted (L) |
| Nominal cross section | 1 mm² |
| Rated voltage (III/2) | 200 V |
| Rated voltage (III/3) | 160 V |
| Solder pin length [P] | 3.5 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 2.5 kV |
| Conductor cross section AWG | 26 ... 16 |
| Rated surge voltage (III/2) | 2.5 kV |
| Rated surge voltage (III/3) | 2.5 kV |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 400 V |
| Conductor cross section flexible | 0.14 mm² ... 1 mm² |
| Note on connection cross section | With connected conductor 1.5 mm² (stranded). |
| Rated insulation voltage (III/2) | 200 V |
| Rated insulation voltage (III/3) | 160 V |
| minimum creepage distance (II/2) | 2 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 1.5 mm |
| minimum creepage distance (III/3) | 2 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (top layer) | Tin (5 - 7 µm Sn) |
| 2 conductors with same cross section, solid | 0.14 mm² ... 0.5 mm² |
| Metal surface soldering area (middle layer) | Nickel (2 - 3 µm Ni) |
| Metal surface terminal point (middle layer) | Nickel (2 - 3 µm Ni) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| 2 conductors with same cross section, flexible | 0.14 mm² ... 0.2 mm² |
| minimum clearance value - non-homogenous field (II/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 1.5 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.14 mm² / solid / > 10 N |
Popis produktu
PCB terminal block, nominal current: 10 A, rated voltage (III/2): 200 V, nominal cross section: 1 mm2, number of rows: 1, number of positions per row: 7, product range: SMKDS 1, pitch: 3.5 mm, connect
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
