Čas služby: pondelok až piatok 9:00-18:00
SACC-M12FS-8CT-CM SH - SACC-M12FS-8CT-CM SH 1319942 PHOENIX CONTACT Connector, Universal, 8-pole, shielded, M12 straight connection..
Na sklade Horúci produkt

SACC-M12FS-8CT-CM SH

SACC-M12FS-8CT-CM SH 1319942 PHOENIX CONTACT Connector, Universal, 8-pole, shielded, M12 straight connection..

$26.61 USD
411 na sklade
Kľúčové špecifikácie
: 4 Nm (Pressure nut with coupling sleeve)
Coding: A
Length: 42 mm
General: NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
4 Nm (Pressure nut with coupling sleeve)
Coding A
Length 42 mm
General NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Shielded yes
Head design Socket
Sensor type Universal
Cable outlet straight
Typ produktu Circular connector (cable-side)
Seal material FKM
Diameter housing 16 mm
Head thread type M12
Outside diameter 4.5 mm ... 7.5 mm
Connection method Crimp connection
Head cable outlet straight
Tightening torque 0.4 Nm (M12 knurl)
Nominal current IN 2 A
Nominal voltage UN 30 V AC
Degree of pollution 3
Dimensional drawing
Number of positions 8
Rated surge voltage 0.8 kV
Degree of protection IP65
No. of cable outlets 1
Overvoltage category II
Signal type/category Universal
Standard designation M12 connector
Insulation resistance ≥ 100 MΩ
Material of grip body Zinc die-cast, nickel-plated
Wrench size, union nut 15 mm
Connection cross section 0.14 mm² ... 0.34 mm² (flexible)
Standards/specifications IEC 61076-2-101
Wrench size, counter nut 14 mm
Insertion/withdrawal cycles ≥ 100
Connection cross section AWG 26 ... 22 (flexible)
Material for screw connection Zinc die-cast, nickel-plated
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Flammability rating according to UL 94 V0
Stripping length of the individual wire 4 mm +0,5 mm

Popis produktu

Connector, Universal, 8-position, shielded, Socket straight M12, coding: A, Crimp connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4.5 mm ... 7.5 mm, without crimp con
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top