Na sklade Horúci produkt
PT-IQ-1X2+F-24DC-UT
PT-IQ-1X2+F-24DC-UT 2800977 PHOENIX CONTACT Surge protection device
$0.00
USD
4344 na sklade
Kľúčové špecifikácie
:
C2
Note:
Remote signaling as well as the power supply of the DIN rail connector are established by snapping the module into place on the DIN rail connector.
Type:
DIN rail module, two-section, divisible
Color:
black (RAL 9005)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| C2 | |
| Note | Remote signaling as well as the power supply of the DIN rail connector are established by snapping the module into place on the DIN rail connector. |
| Type | DIN rail module, two-section, divisible |
| Color | black (RAL 9005) |
| Depth | 77.5 mm (incl. DIN rail 7.5 mm) |
| Width | 17.7 mm |
| Height | 91.1 mm |
| Altitude | ≤ 4000 m (amsl) |
| Typ produktu | Surge protection for MCR technology |
| Screw thread | M3 |
| Mounting type | DIN rail: 35 mm |
| Rated current | 1000 mA (40 °C) |
| Product family | PLUGTRAB IQ |
| Open side panel | No |
| Article revision | 08 |
| Horizontal pitch | 1 Div. |
| Housing material | PA 6.6 |
| Pollution degree | 2 |
| Connection method | Screw connection |
| Tightening torque | 0.5 Nm |
| Nominal voltage UN | 24 V DC |
| Dimensional drawing | |
| Direction of action | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
| Resistance per path | 1.2 Ω ±5 % |
| Degree of protection | IP20 |
| Overvoltage category | III |
| Residual current IPE | ≤ 1 µA |
| Capacity (Core-Earth) | typ. 2 nF |
| Wire pairs per module | 1 |
| IEC test classification | C1 |
| Standards/specifications | IEC 61643-21 |
| Input attenuation aE, sym. | typ. 0.3 dB (≤ 270 kHz/150 Ω) |
| Max. required back-up fuse | 1 A (FF) |
| Conductor cross section AWG | 24 ... 12 |
| Response time tA(line-line) | ≤ 1 ns |
| Pulse reset time (line-line) | ≤ 4000 ms |
| Response time tA(line-earth) | ≤ 100 ns |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Maximum continuous voltage UC | 30 V DC |
| Pulse reset time (line-earth) | ≤ 30 ms |
| Impulse durability (line-line) | C1 - 1 kV / 500 A |
| Surge protection fault message | Optical, multi-stage |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Impulse durability (line-earth) | C1 - 1 kV / 500 A |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 5 % ... 95 % |
| Operating effective current ICat UC | ≤ 1 mA (in the signal circuit) |
| Response time tA(line-signalground) | ≤ 100 ns |
| Pulse reset time (line-signalground) | ≤ 2600 ms |
| Flammability rating according to UL 94 | V-0 |
| Impulse durability (line-signalground) | C1 - 1 kV / 500 A |
| Voltage protection level Up(line-line) | ≤ 80 V (C1 - 1 kV / 500 A) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Voltage protection level Up(line-earth) | ≤ 900 V (C1 - 1 kV / 500 A) |
| Total discharge current Itotal(8/20) µs | 20 kA |
| Voltage protection level Upstatic (line-line) | ≤ 65 V (C1 - 1 kV / 500 A) |
| Voltage protection level Up(line-signalground) | ≤ 600 V (C1 - 1 kV / 500 A) |
| Nominal discharge current In(8/20) µs (line-line) | 10 kA |
| Cut-off frequency fg (3 dB), sym. in 150 Ω system | typ. 1.1 MHz |
| Nominal discharge current In(8/20) µs (line-ground) | 10 kA |
| Pulse discharge current Iimp(10/350) µs (line-earth) | 2.5 kA |
Popis produktu
Surge protection, consisting of plug-in protection and base element, with multi-level diagnostic and status indication integrated into a module for a circ. of 2-wire signal free of potential. Indir gr
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
