Čas služby: pondelok až piatok 9:00-18:00
PSM-ME-RS232/RS485-P - PSM-ME-RS232/RS485-P 2744416 PHOENIX CONTACT Interface converter
Na sklade Horúci produkt

PSM-ME-RS232/RS485-P

PSM-ME-RS232/RS485-P 2744416 PHOENIX CONTACT Interface converter

$0.00 USD
4769 na sklade
Kľúčové špecifikácie
: RS-422
EMC: B
MTBF: 10 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
MTTF: 1654 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
RS-422
EMC B
MTBF 10 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))
MTTF 1654 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Note Please follow the special installation instructions in the documentation!
Depth 114.5 mm
Input ± 2.2 kV (Test Level 3)
Width 22.5 mm
Height 99 mm
Signal Modbus
Voltage 10 V
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Comments Criterion B
EMC note EMC: class A product, see manufacturer's declaration in the download area
Humidity A
Bit delay ≤ 2.5 µs
Enclosure Required protection according to the Rules shall be provided upon installation on board
Interface RS-232/-485
Vibration A
CCCex note Use in potentially explosive areas is not permitted in China.
Application RS-232
Certificate CE-compliant
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
Temperature B
Typ produktu Interface converter
Mounting type DIN rail mounting
Bit distortion ≤ 5 %
Identification  II 3 G Ex nA IIC T4 Gc
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2:2005
Pin assignment DTE/DCE switchover via switch
Color (Housing) green (RAL 6021)
Field intensity 10 V/m
Frequency range 26 MHz ... 3 GHz (Test Level 3)
Article revision 22
Discharge in air ± 8 kV (Test Level 3)
Pollution degree 2
Connection method D-SUB 9 plug
Contact discharge ± 6 kV (Test Level 3)
Tightening torque 0.56 Nm ... 0.79 Nm
Material (Housing) PA 6.6-FR
Dimensional drawing
Note on application Only for industrial use
Protocols supported transparent protocol
Transmission length 15 m (shielded twisted pair)
Degree of protection IP20
Electrical isolation VCC // V.24 (RS-232) // RS-485
Supply voltage range 18 V AC/DC ... 30 V AC/DC (via pluggable COMBICON screw terminal block)
Termination resistor 390 Ω
Standards/regulations EN 61000-4-2
Transmission channels 2 (1/1), RxD, TxD, full duplex
Nominal supply voltage 24 V AC/DC
Data direction switching Automatic control or via RTS/CTS
Max. current consumption 100 mA
Serial transmission speed 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 31.25; 38.4; 57.6; 75; 93.75; 115.2 kbps
Typical current consumption 85 mA (24 V DC)
Test voltage data interfaces 1.5 kV AC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Ambient temperature (operation) -40 °C ... 70 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Single-wire/terminal point, flexible 0.2 mm² ... 2.5 mm²
Single conductor/terminal point, rigid 0.2 mm² ... 2.5 mm²
Ambient temperature (storage/transport) -40 °C ... 85 °C
Conductor cross section, flexible [AWG] 24 ... 12
Test voltage data interface/power supply 1.5 kV AC
Max. AWG conductor cross section, flexible 12
Min. AWG conductor cross section, flexible 24
Maximum power dissipation for nominal condition 2.04 W

Popis produktu

Interface converter for conversion from RS-232 (V.24) to RS-422 (V.11) and RS-485, with galvanic separation, 2 channels, for rail mounting
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top