Na sklade Horúci produkt
OTTA 6-T
OTTA 6-T 0790446 PHOENIX CONTACT Universal terminal block with bolt connection, with disconnect slide, cross..
$0.00
USD
3219 na sklade
Kľúčové špecifikácie
Note:
Connection bolts
Color:
gray
Width:
11 mm
Length:
69 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| Note | Connection bolts |
| Color | gray |
| Width | 11 mm |
| Length | 69 mm |
| Height NS 32 | 57 mm |
| Screw thread | M4 |
| Bolt diameter | 4 mm |
| Hole diameter | 4.3 mm |
| End cover width | 1.5 mm |
| Height NS 35/15 | 59.5 mm |
| Open side panel | ja |
| Height NS 35/7,5 | 52 mm |
| Number of levels | 1 |
| Pollution degree | 3 |
| Connection method | Bolt connection |
| Nominal current IN | 36 A |
| Nominal voltage UN | 800 V (the nominal voltage applies to insulated cable lugs) |
| Insulating material | PA |
| Rated surge voltage | 8 kV |
| Maximum load current | 36 A (with 6 mm² conductor cross section) |
| Overvoltage category | III |
| Nominal cross section | 6 mm² |
| Number of connections | 2 |
| Tightening torque max | 1.8 Nm |
| Tightening torque, min | 1.5 Nm |
| Insulating material group | I |
| Conductor cross section AWG max. | 10 |
| Conductor cross section AWG min. | 26 |
| Connection in acc. with standard | IEC 60947-7-1 |
| Conductor cross section solid max. | 6 mm² |
| Conductor cross section solid min. | 0.1 mm² |
| Conductor cross section flexible max. | 6 mm² |
| Conductor cross section flexible min. | 0.1 mm² |
| Flammability rating according to UL 94 | V0 |
| Cable lug connection according to standard | DIN 46 234 |
| Max. AWG conductor cross section, flexible | 10 |
| Min. AWG conductor cross section, flexible | 26 |
| Max. cross section for cable lug connection | 6 mm² |
| Min. cross section for cable lug connection | 0.1 mm² |
Popis produktu
Interruptible terminal block, with sliding skid, nominal voltage: 800 V, nominal current: 36 A, 1st floor, connection type: Stud connection, Sizing cross-section: 6 mm², mounting: NS 35/7.5, NS 35/15,
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
