Na sklade Horúci produkt
MKDSO 2,5 HV/ 2L-7,5 KMGY
MKDSO 2,5 HV/ 2L-7,5 KMGY 2199676 PHOENIX CONTACT PCB terminal block
$0.00
USD
4255 na sklade
Kľúčové špecifikácie
:
0.2 mm² / flexible / > 10 N
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:
7.5 mm
Result:
Test passed
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 7.5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 14.9 mm |
| Height [h] | 22.25 mm |
| Length [l] | 18.8 mm |
| Pin layout | Linear pinning |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Typ produktu | Printed circuit board terminal |
| Hole diameter | 1.4 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60998-2-1:2002-12 |
| Number of rows | 1 |
| Pin dimensions | 0.8 x 1 mm |
| Product family | MKDSO 2,5 HV/..-L |
| Color (Housing) | light gray (7035) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 02 |
| Contact material | Cu alloy |
| Stripping length | 8 mm |
| Time of exposure | 5 s |
| Connection method | Screw connection with tension sleeve |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Nominal current IN | 24 A |
| Nominal voltage UN | 600 V |
| Dimensional drawing | |
| Insulating material | PA |
| Note on application | For reliable conductor connection, always adhere to a defined tightening torque.During conductor connection (mounting), the terminal blocks must be supported (held with one hand, support on the housing). |
| Number of positions | 2 |
| Rated voltage (II/2) | 1000 V |
| Nominal cross section | 2.5 mm² |
| Rated voltage (III/2) | 630 V |
| Rated voltage (III/3) | 630 V |
| Solder pin length [P] | 3.5 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 6 kV |
| Conductor cross section AWG | 24 ... 14 |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 1000 V |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated insulation voltage (III/2) | 630 V |
| Rated insulation voltage (III/3) | 630 V |
| minimum creepage distance (II/2) | 5.5 mm |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| minimum creepage distance (III/2) | 5.5 mm |
| minimum creepage distance (III/3) | 8 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface terminal point (top layer) | Tin (Sn) |
| 2 conductors with same cross section, solid | 0.2 mm² ... 0.75 mm² |
| Insulation resistance, neighboring positions | 109Ω |
| 2 conductors with same cross section, flexible | 0.25 mm² ... 0.75 mm² |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 5.5 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.75 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.25 mm² ... 1.5 mm² |
Popis produktu
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 630 V, nominal section: 2.5 mm², number of rows: 1, number of poles per row: 2, article family: MKDSO 2.5 HV/.
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
