Na sklade Horúci produkt
IBS RL 24 DIO 4/2/4-LK-2MBD
IBS RL 24 DIO 4/2/4-LK-2MBD 2732486 PHOENIX CONTACT Distributed I/O device
$0.00
USD
3277 na sklade
Kľúčové špecifikácie
Note:
Seal unused slots/connections to ensure the degree of protection.
Type:
Block design
Depth:
71 mm
Width:
127 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| Note | Seal unused slots/connections to ensure the degree of protection. |
| Type | Block design |
| Depth | 71 mm |
| Width | 127 mm |
| Height | 67 mm |
| Ripple | Max 3.6 VSSwithin the permissible voltage range |
| Input name | Digital inputs |
| Output name | Digital outputs |
| Typ produktu | I/O component |
| Mounting type | Wall mounting |
| Output voltage | 24 V DC |
| Product family | Ruggedline |
| Supply current | typ. 80 mA (plus sensor current) |
| Supply voltage | 24 V DC |
| No. of channels | 6 |
| Number of inputs | 4 |
| Connection method | Optic fiber (polymer fiber 980/1000 µm) |
| Number of outputs | 2 |
| Nominal load, lamp | 12 W |
| Note on dimensions | with bus connection plugs and mounting panel |
| Protective circuit | Electronic short-circuit/overload protection for each group |
| Transmission speed | 2 Mbps |
| Nominal load, ohmic | 12 W |
| Degree of protection | IP65/IP67 |
| Supply voltage range | 18.5 V DC ... 32 V DC (including ripple) |
| Total sensor current | max. 200 mA |
| Transmission physics | FO |
| Connection technology | 2-, 3-, 4-conductor |
| Overcurrent shut-down | min. 0.7 A |
| Behavior with overload | Auto restart |
| Nominal output voltage | 24 V |
| Nominal load, inductive | 12 VA (1.2 H, 48 Ω) |
| Air pressure (operation) | 860 hPa ... 1080 hPa (up to 1500 m above sea level) |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Ambient temperature (operation) | 0 °C ... 55 °C |
| Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
| Behavior with inductive overload | Output can be destroyed |
| Output current when switched off | max. 100 µA |
| Output voltage when switched off | max. 1 V |
| Permissible humidity (operation) | 100 % |
| Typical input current per channel | 3 mA |
| Delay at signal change from 0 to 1 | 3 ms |
| Delay at signal change from 1 to 0 | 3 ms |
| Maximum output current per channel | 500 mA |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Permissible humidity (storage/transport) | 95 % (non-condensing) |
| Test voltage: Between bus logic and outputs | 500 V AC, 50 Hz, 1 min. |
| Output current with ground connection interrupt when switched off | max. 25 mA |
Popis produktu
Digital input/output equipment for INTERBUS; Fibre optic technology with 2 Mbaud, four inputs (24 V DC), two outputs (24 V DC, 0.5 A), sensor/actuator connection via 5-pole M12 female connectors, robu
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
