Čas služby: pondelok až piatok 9:00-18:00
IB IL CNT-PAC - IB IL CNT-PAC 2861852 PHOENIX CONTACT Inline function terminal
Na sklade Horúci produkt

IB IL CNT-PAC

IB IL CNT-PAC 2861852 PHOENIX CONTACT Inline function terminal

$0.00 USD
3347 na sklade
Kľúčové špecifikácie
: 30 V DC (maximum)
Type: modular
Depth: 71.5 mm
Width: 24.4 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
30 V DC (maximum)
Type modular
Depth 71.5 mm
Width 24.4 mm
Height 135 mm
Input name Counter input for 24 V signals
Designation Power supply for sensors
Output name Switching output
Current draw max. 50 mA
Typ produktu I/O component
ID code (hex) BF
Input current typ. 5 mA
Input voltage 24 V DC (Nominal voltage)
Mounting type DIN rail mounting
ID code (dec.) 191
Operating mode Event counting, frequency/time measurement
Output current max. 0.5 A (Nominal current)
Output voltage 24 V DC (Nominal voltage)
Product family Inline
Supply voltage 7.5 V DC (via voltage jumper)
Connection name Inline connector
Input frequency max. 100 kHz
Register length 4 Byte
Article revision 08
Input resistance approx. 5.7 kΩ
Number of inputs 1 (only one counter input can be used, either for 24 V or for 5 V signals)
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Stripping length 8 mm
Connection method Inline data jumper
Length code (dec) 02
Length code (hex) 02
Number of outputs 1
Scope of delivery including Inline connectors and marking fields
Input address area 4 Byte
Nominal load, lamp max. 12 W
Protective circuit Short-circuit protection; Yes, short-circuit-proof (automatically switched on again)
Transmission speed 500 kbps
Dimensional drawing
Nominal load, ohmic max. 12 W (48 Ω)
Note on application Only for industrial use
Output address area 4 Byte
Degree of protection IP20
Diagnostics messages Sensor supply short-circuit
Number of interfaces 2
Process data channel 32 bit
Transmission physics Copper
Connection technology 2-, 3-conductor
Overcurrent shut-down min. 0.7 A
Nominal load, inductive max. 12 VA (1.2 H, 48 Ω)
Required parameter data 1 Byte
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section AWG 28 ... 16
Required configuration data 5 Byte
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Input voltage range "0" signal 0 V DC ... 5 V DC
Input voltage range "1" signal 15 V DC ... 30 V DC
Ambient temperature (operation) -25 °C ... 55 °C
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Behavior with inductive overload Output can be destroyed
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Behavior in the event of lamp overload Auto restart after eliminating the overload
Ambient temperature (storage/transport) -25 °C ... 85 °C
Behavior in the event of ohmic overload Auto restart after eliminating the overload
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Reverse voltage resistance to short pulses Reverse voltage proof
Maximum power dissipation for nominal condition 1.2 W
Test voltage: 24 V supply (I/O) / functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic)/functional ground 500 V AC, 50 Hz, 1 min.

Popis produktu

Inline counter terminal block, complete with accessories (connectors and marking surfaces), 1 meter input, 1 control input, 1 output, 24 V DC, 500 mA, 3-conductor connection technology
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top