Čas služby: pondelok až piatok 9:00-18:00
IB IL AI 2/SF-PAC - IB IL AI 2/SF-PAC 2861302 PHOENIX CONTACT Inline terminal
Na sklade Horúci produkt

IB IL AI 2/SF-PAC

IB IL AI 2/SF-PAC 2861302 PHOENIX CONTACT Inline terminal

$0.00 USD
3551 na sklade
Kľúčové špecifikácie
: 4 mA ... 20 mA
Type: modular
Depth: 71.5 mm
Width: 12.2 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
4 mA ... 20 mA
Type modular
Depth 71.5 mm
Width 12.2 mm
Height 136.8 mm
CCCex note Use in potentially explosive areas is not permitted in China.
Input name Analog inputs
Current draw max. 60 mA
Data formats IB IL, IB ST, IB RT, standardized representation
Typ produktu I/O component
ID code (hex) 7F
Mounting type DIN rail mounting
ID code (dec.) 127
Operating mode Process data operation with 2 words
Product family Inline
Supply voltage 7.5 V DC (via voltage jumper)
Connection name Inline connector
Register length 32 bit
Article revision 12
Number of inputs 2
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Stripping length 8 mm
Connection method Inline data jumper
Length code (dec) 02
Length code (hex) 02
Scope of delivery including Inline connector and labeling field
Input address area 4 Byte
Note on dimensions Housing dimensions
Protective circuit Surge protection; Suppressor diodes in the analog inputs
Transmission speed 500 kbps
A/D conversion time typ. 120 µs (per channel)
Dimensional drawing
Measuring principle Successive approximation
Note on application Only for industrial use
Output address area 4 Byte
Current input signal 0 mA ... 20 mA
Degree of protection IP20
Diagnostics messages Failure of the internal I/O supply yes
Number of interfaces 2
Overvoltage category II (IEC 60664-1, EN 60664-1)
Process data channel 32 bit
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Voltage input signal 0 V ... 10 V
Connection technology 2-conductor
Limit frequency (3 dB) 40 Hz
Required parameter data 6 Byte
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Description of the input Single-ended inputs, voltage or current
Measured value resolution 16 bits (15 bits + sign bit)
Conductor cross section AWG 28 ... 16
Required configuration data 4 Byte
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Measured value representation 16 bit two's complement
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Input resistance current input 50 Ω (Shunt)
Ambient temperature (operation) -25 °C ... 55 °C
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Input resistance of voltage input > 220 kΩ
Test voltage: I/O/functional ground 500 V AC, 50 Hz, 1 min.
Ambient temperature (storage/transport) -25 °C ... 85 °C
Note regarding the connection technology shielded
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Common mode voltage range signal - ground 40 V (Between current input and functional ground)
Maximum power dissipation for nominal condition 0.9 W
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ I/O 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ functional ground 500 V AC, 50 Hz, 1 min.

Popis produktu

Inline, Analog input module, Analog inputs: 2, 0 V ... 10 V, -10 V ... 10 V, 0 mA... 20 mA, 4 mA... 20 mA, -20 mA... 20 mA, connection technology: 2 conductors, transmission rate on local bus: 500 kBi
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top