Na sklade Horúci produkt
HC-M-02-HS-70/16-MOD-ST
HC-M-02-HS-70/16-MOD-ST 1585702 PHOENIX CONTACT Contact insert module
$0.00
USD
4734 na sklade
Kľúčové špecifikácie
GTIN:
4046356308205
Note:
Made to Order (non-returnable)
Orderkey:
1585702
Catalog page:
Page 553 (C-4-2015)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| GTIN | 4046356308205 |
| Note | Made to Order (non-returnable) |
| Orderkey | 1585702 |
| Catalog page | Page 553 (C-4-2015) |
| Packing unit | 2 pc |
| Country of origin | DE (Germany) |
| Custom tariff number | 85366990 |
| (Ambient conditions) | 4 Nm (16 mm²) |
| Minimum order quantity | 2 pc |
| Contact material (General) | Copper alloy |
| Rated current (Dimensions) | 70 A |
| Width (Key Commercial Data) | 34.2 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Height (Key Commercial Data) | 45 mm |
| Length (Key Commercial Data) | 14.6 mm |
| Connection profile (Dimensions) | 2 |
| Rated surge voltage (Dimensions) | 8 kV |
| Contact carrier material (General) | PC |
| Contact surface material (General) | Ag |
| Rated voltage (III/3) (Dimensions) | 1000 V |
| Series (Mechanical characteristics) | HC-M-HS |
| Weight per Piece (excluding packing) | 32.180 g |
| Hexagonal socket (Ambient conditions) | SW2,5 |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Tightening torque (Ambient conditions) | 2 Nm (6 mm² ) |
| Connection (Mechanical characteristics) | Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. |
| Minimum housing height (Ambient conditions) | 72 mm |
| Conductor cross section (Ambient conditions) | 6 mm² ... 16 mm² |
| Connection method (Mechanical characteristics) | Axial screw connection |
| Connection in acc. with standard (Material data) | UL |
| Degree of pollution (Mechanical characteristics) | 3 |
| Insertion/withdrawal cycles (Ambient conditions) | ≥ 500 |
| Connection cross section AWG (Ambient conditions) | 8 ... 6 |
| Overvoltage category (Mechanical characteristics) | III |
| Assembly instructions (Mechanical characteristics) | Use 2.5 mm Allen wrenches for axial connection. Only for stranded wires. For housing heights h ≥ 52 mm. Plug-in connections may only be operated only when there is no load/voltage. |
| Number of module slots (Mechanical characteristics) | 1 |
| Flammability rating according to UL 94 (Material data) | V0 |
| Wire diameter including insulation (Ambient conditions) | 8.9 mm |
| Ambient temperature (operation) (Electrical characteristics) | -40 °C ... 125 °C |
| Stripping length of the individual wire (Ambient conditions) | 11 mm +1 |
| Flammability rating according to UL 94 (Mechanical characteristics) | V0 |
Popis produktu
More details
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
