Na sklade Horúci produkt
HC-DD72-I-CT-M-144
HC-DD72-I-CT-M-144 1584088 PHOENIX CONTACT Contact insert
$25.55
USD
429 na sklade
Kľúčové špecifikácie
:
B32
SCCR:
5 kA (UL 2237)
Type:
B16
Tests:
DIN VDE 0627/86
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| B32 | |
| SCCR | 5 kA (UL 2237) |
| Type | B16 |
| Tests | DIN VDE 0627/86 |
| Width | 34 mm |
| Height | 32.5 mm |
| Length | 84 mm |
| Series | HC-DD |
| General | For HEAVYCON ADVANCE and HEAVYCON housing of type B16, crimp contacts: CK 1,6-ED... (not included in scope of supply) |
| Application | Signal |
| Typ produktu | Contact insert with a fixed no. of positions |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Rated current | 10 A |
| Article revision | 12 |
| Contact diameter | 1.6 mm |
| Contact material | Copper alloy |
| Contact numbering | 73 - 144 |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| Connection profile | 72+PE |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 72 |
| Rated surge voltage | 4 kV |
| Overvoltage category | III |
| Connection technology | Crimp connection |
| Contact material type | turned |
| Rated voltage (III/3) | 250 V |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Minimum housing height | 72 mm |
| Conductor cross section | 0.14 mm² ... 2.5 mm² |
| Contact carrier material | PC |
| Contact surface material | Ag (alternatively Au) |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 26 ... 14 |
| Drill hole distance, vertical | 27 mm |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Drill hole distance, horizontal | 77.5 mm |
| Connection in acc. with standard | IEC / EN |
| Constructional and testing regulations | DIN VDE 0627/86 |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 8 mm (0.14 mm² ... 1.5 mm²) |
Popis produktu
Contact insert, number of poles: 72+PE, size: B16, Male, Crimped connection, 250 V, 10 A, 0.14 mm² ... 2.5 mm², application: Signal
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
