Na sklade Horúci produkt
HC-A 10-EBUC
HC-A 10-EBUC 1676983 PHOENIX CONTACT Contact insert
$0.00
USD
3817 na sklade
Kľúčové špecifikácie
:
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Type:
D15
Tests:
DIN VDE 0627/86
Width:
23 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) | |
| Type | D15 |
| Tests | DIN VDE 0627/86 |
| Width | 23 mm |
| Height | 30 mm |
| Length | 56.5 mm |
| Series | HC-A |
| General | for flexible conductors with or without ferrules |
| Typ produktu | Contact insert with a fixed no. of positions |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Rated current | 16 A |
| Article revision | 04 |
| Contact diameter | 2.5 mm |
| Contact material | Copper alloy |
| Contact numbering | 1 - 10 |
| Tightening torque | 0.7 Nm ... 1 Nm (PE connection) |
| Connection profile | 10+PE |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 10 |
| Rated surge voltage | 4 kV |
| Overvoltage category | III |
| Connection technology | Crimp connection |
| Contact material type | turned |
| Rated voltage (III/3) | 250 V |
| Conductor cross section | 0.5 mm² ... 4 mm² |
| Contact carrier material | PA |
| Contact surface material | Ag (alternatively Au) |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 20 ... 12 |
| Drill hole distance, vertical | 16 mm |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Drill hole distance, horizontal | 49.5 mm |
| Connection in acc. with standard | IEC / EN |
| Number of connections per position | 1 |
| Constructional and testing regulations | DIN VDE 0627/86 |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 8 mm |
Popis produktu
HEAVYCON Female Insert, A10 Series, 10 Poles, Crimped Connection
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
