Na sklade Horúci produkt
FLT-SEC-T1+T2-2IT-350/25-FM
FLT-SEC-T1+T2-2IT-350/25-FM 1044388 PHOENIX CONTACT Type 1+2 protective device combination
$0.00
USD
4035 na sklade
Kľúčové špecifikácie
GTIN:
4055626620862
Note:
Made to Order (non-returnable)
Orderkey:
1044388
Packing unit:
1 pc
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| GTIN | 4055626620862 |
| Note | Made to Order (non-returnable) |
| Orderkey | 1044388 |
| Packing unit | 1 pc |
| Country of origin | DE (Germany) |
| (Connection data) | EN 61643-11 2012 |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| (Protective circuit) | 1 A DC (30 V DC) |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| (Additional descriptions) | ≤ 0.9 kV (at 3 kA / L2-PE) |
| Color (Ambient conditions) | light gray RAL 7035 |
| Depth (Key Commercial Data) | 74.5 mm |
| Width (Key Commercial Data) | 71.2 mm |
| EN type (Ambient conditions) | T1 + T2 |
| Height (Key Commercial Data) | 95.2 mm |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Screw thread (Protective circuit) | M2 |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Weight per Piece (excluding packing) | 633.600 g |
| Housing material (Ambient conditions) | PA 6.6-FR 20% GF |
| Stripping length (Protective circuit) | 7 mm |
| Connection method (Protective circuit) | Plug-in/screw connection via COMBICON |
| Horizontal pitch (Key Commercial Data) | 4 Div. |
| Operating current (Protective circuit) | 10 mA AC ... 1 A AC |
| Operating voltage (Protective circuit) | 12 V AC ... 250 V AC |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Mode of protection (Ambient conditions) | L-PE |
| Standards/regulations (Connection data) | IEC 61643-11 2011 |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Screw thread (Indicator/remote signaling) | M5 |
| Response time tA (Additional descriptions) | ≤ 25 ns |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | IT |
| IEC test classification (Ambient conditions) | I + II |
| Nominal voltage UN (Additional descriptions) | 240 V AC (IT) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 18 mm |
| Connection method (Indicator/remote signaling) | Fork-type cable lug |
| Nominal frequency fN (Additional descriptions) | 50 Hz (60 Hz) |
| Residual current IPE (Additional descriptions) | ≤ 0.5 mA |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm |
| Rated load current IL (Additional descriptions) | 125 A (< 55 °C) |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| TOV behavior at UT(L-PE) (Additional descriptions) | 415 V AC (5 s / withstand mode) |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Residual voltage Ures(L-L) (Additional descriptions) | ≤ 1.5 kV (at In/ L1-L2) |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Residual voltage Ures(L-PE) (Additional descriptions) | ≤ 2.8 kV (at In/ L1-PE) |
| Conductor cross section AWG (Indicator/remote signaling) | 13 ... 2 |
| Conductor cross section solid (Indicator/remote signaling) | 2.5 mm² ... 35 mm² |
| Voltage protection level Up(L-L) (Additional descriptions) | ≤ 1.5 kV (L1-L2) |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Voltage protection level Up(L-PE) (Additional descriptions) | ≤ 2.8 kV (L1-PE) |
| Short-circuit current rating ISCCR (Additional descriptions) | 25 kA (264 V AC) |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 16 mm² |
| Max. backup fuse with branch wiring (Additional descriptions) | 315 A (gG) |
| Nominal discharge current In(8/20) µs (Additional descriptions) | 25 kA |
| Follow current interrupt rating Ifi(L-PE) (Additional descriptions) | 25 kA (264 V AC) |
| Max. backup fuse with V-type through wiring (Additional descriptions) | 125 A (gG) |
| Maximum continuous operating voltage UC(L-PE) (Additional descriptions) | 350 V AC |
| Impulse discharge current (10/350) µs, charge (Additional descriptions) | 12.5 As |
| Impulse discharge current (10/350) µs, peak value limp (Additional descriptions) | 25 kA |
| Impulse discharge current (10/350) µs, specific energy (Additional descriptions) | 160 kJ/Ω |
Popis produktu
Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for two-phase power supply networks with isolated operation (L1, L2, PE).
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
