Čas služby: pondelok až piatok 9:00-18:00
FLT-SEC-P-T1-N/PE-350/100-P - FLT-SEC-P-T1-N/PE-350/100-P 2905473 PHOENIX CONTACT Type 1 surge protection plug
Na sklade Horúci produkt

FLT-SEC-P-T1-N/PE-350/100-P

FLT-SEC-P-T1-N/PE-350/100-P 2905473 PHOENIX CONTACT Type 1 surge protection plug

$0.00 USD
3062 na sklade
Kľúčové špecifikácie
: I
Note: 2011
Type: Male
Color: light gray (RAL 7035)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora

Technické špecifikácie

Parameter Hodnota
I
Note 2011
Type Male
Color light gray (RAL 7035)
Depth 59.4 mm
Width 35.5 mm
Height 46.4 mm
EN type T1 / T2
Altitude ≤ 2000 m (amsl)
SPD Type 1CA
Typ produktu Replacement plug
Mounting type on base element
Material group I
Product family SEC Family
Article revision 04
Horizontal pitch 2 Div.
Housing material PA 6.6-FR 20 % GF
Pollution degree 2
Response time tA ≤ 100 ns
Connection method pluggable
Nominal frequency 50/60 Hz
Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Mode of protection N-PE
Nominal voltage UN 240 V AC (TN - only N-PE)
TOV behavior at UT 1200 V AC (200 ms / withstand mode)
Dimensional drawing
Direction of action N-PE
Insulating material PA6.6-FR 20% GF
Number of positions 1
Degree of protection IP20
Nominal frequency fN 50 Hz (60 Hz)
Overvoltage category III
Residual current IPE ≤ 0.01 mA
CTI value of material 600
Residual voltage Ures ≤ 1.5 kV (at In)
Vibration (operation) 5g (5 - 500 Hz/2.5 h/X, Y, Z)
IEC power supply system TN
IEC test classification I / II
Standards/specifications IEC 61643-11
Voltage protection level Up ≤ 1.5 kV
Nominal discharge current In 20 kA
Maximum continuous voltage UC 350 V AC
Voltage protection rating VPR 1200 V
Surge protection fault message optical
Ambient temperature (operation) -40 °C ... 80 °C
Permissible humidity (operation) 5 % ... 95 %
Follow current interrupt rating Ifi 100 A (350 V AC)
Flammability rating according to UL 94 V-0
Nominal discharge current In(8/20) µs 100 kA
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum continuous operating voltage MCOV 350 V AC
Impulse discharge current (10/350) µs, charge 50 As
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 1.5 kV
Impulse discharge current (10/350) µs, peak value limp 100 kA
Impulse discharge current (10/350) µs, specific energy 2500 kJ/Ω

Popis produktu

Replacement connectors for lightning current arresters from the FLASHTRAB SEC product line, for the N-PE section.
Kľúčové vlastnosti
  • Priemyselná kvalita
  • V súlade s RoHS
  • Certifikácia CE
  • 1-ročná záruka

Dokumenty k produktu

Dátový list

Technické špecifikácie a údaje o výkone

Používateľská príručka

Návod na inštaláciu a obsluhu

Top