Na sklade Horúci produkt
EX-Z11FA-R
EX-Z11FA-R PANASONIC Thru beam, 50mm, front sensing, Light-ON, NPN, high flexible cable 2m
$0.00
USD
3027 na sklade
Kľúčové špecifikácie
Item:
Specifications
Cable:
0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong.
Output:
NPN open-collector transistor- Maximum sink current: 20 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 20 mA sink current)
Remark:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉.
Informácie o dodávateľovi
PANASONIC
Produkty: 4316
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| Item | Specifications |
| Cable | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong. |
| Output | NPN open-collector transistor- Maximum sink current: 20 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 20 mA sink current) |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉. |
| Weight | Net weight (each emitter and receiver) : 15 g approx.Gross weight: 35 g approx. |
| Details | Thru-beam [Front sensing] |
| Product | Ultra-minute Photoelectric Sensor |
| Material | Enclosure: PBTLens: PolycarbonateMetallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| Accessory | M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length) |
| Grounding | Floating |
| Protection | IP67 (IEC) |
| Part Number | EX-Z11FA-R |
| Názov produktu | Ultra-minute Photoelectric Sensor EX-Z |
| Response time | 0.5 ms or less |
| Sensing range | 50 mm1.969 in |
| Product Number | EX-Z11FA-R |
| Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Cable extension | Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitting element | Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated) |
| Output operation | Light-ON |
| Shock resistance | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each |
| Ambient illuminance | Incandescent light: 5,000 ℓx at the light-receiving face |
| Ambient temperature | -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉ |
| Current consumption | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Min. sensing object | ø0.3 mmø0.012 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm1.969 in) |
| Operation indicator | Orange LED (Lights up when the sensing output is ON) |
| Stability indicator | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| Vibration resistance | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| Insulation resistance | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Output:Short-circuit protection | Incorporated |
| Repeatability(perpendicular to sensing axis) | 0.02 mm0.001 inor less |
Popis produktu
More details
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
