Na sklade Horúci produkt
EV-T2M3SO12-4P-R-P-SET
EV-T2M3SO12-4P-R-P-SET 1532125 PHOENIX CONTACT CHARX connect modular, Infrastructure socket, Rectangular, Pr..
$147.99
USD
109 na sklade
Kľúčové špecifikácie
:
compatible with infrastructure charging plugs
Type:
Premium
Depth:
87.95 mm
Width:
75 mm
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| compatible with infrastructure charging plugs | |
| Type | Premium |
| Depth | 87.95 mm |
| Width | 75 mm |
| Design | with round protective cover |
| Height | 91.71 mm |
| Number | 5 (L1, L2, L3, N, PE) |
| Altitude | 5000 m (above sea level) |
| Position | in the frame of the protective cover |
| Cable type | without single-core wires |
| Resistance | > 10 kΩ ((Shutdown value)) |
| Application | for charging electric vehicles (EV) with alternating current (AC) |
| Diagnostics | Short circuit, cable break |
| Sensor type | PTC chain |
| Affixed logo | PHOENIX CONTACT logo |
| Cable length | 0.5 m |
| Typ produktu | Infrastructure charging socket |
| Charging mode | Mode 3, Case B |
| Fixing screws | M5 thread |
| Rated current | 32 A |
| Rated voltage | 480 V AC |
| Charging power | max. 26.6 kW |
| Product family | CHARX connect modular |
| Cable structure | 4 x 0.5 mm² |
| Color (Housing) | black (9005) |
| Connection type | common cathode |
| Insertion force | < 100 N |
| Attachment point | Sensor for the AC contacts |
| Cable resistance | ≤ 37.1 Ω/m |
| Charging current | max. 32 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | Type 2 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Material (Housing) | Plastic |
| Single wire, color | BU/RD, BU/GN, BU/YE, BU/BN |
| Dimensional drawing | |
| Max. wall thickness | max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug) |
| Charging power rating | 22 kW |
| Single wire, material | PVC |
| Standards/regulations | DIN˽EN 60738-1 |
| Mounting hole diameter | 7.00 mm (ø) |
| Type of cover movement | Self-locking |
| Design (Protective cap) | circular |
| External cable diameter | 1.6 mm ±0.20 mm |
| Color (Protective cover) | black (9005) |
| Note number of positions | 4-pos. |
| Type of charging current | AC 3-phase |
| Design (Protective cover) | circular |
| Material (Contact surface) | Silver |
| Measuring range_resistance | 800 Ω ... 300 kΩ |
| Insertion/withdrawal cycles | > 10000 |
| Material (Protective cover) | Plastic |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation |
| Mechanical emergency release | available |
| Recommended measured current | ≤ 1 mA (Umax= 24 V DC) |
| Reverse current of the motor | max. 1 A |
| Note on the connection method | Connection via spade connector, separable and reconnectable |
| Service life insertion cycles | > 10000 load cycles |
| Mounting type Protective cover | Rear panel mounting |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Position of the locking actuator | top center |
| Typical motor current for locking | 0.2 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1000 ms |
| Maximum voltage for locking detection | 30 V |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Degree of protection (Protective cover) | IP54 |
| Design (Infrastructure charging socket) | square |
| Possible power supply range at the motor | 9 V ... 16 V |
| Screws included in the scope of delivery | none |
| Mounting type Infrastructure charging socket | Rear panel mounting (0 to 90 degree frontal inclination possible) |
| Degree of protection (Infrastructure charging socket) | IP44 (plugged in) |
Popis produktu
More details
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
