Na sklade Horúci produkt
CHARX T2HCI12-1AC32-2,0M6
CHARX T2HCI12-1AC32-2,0M6 1465291 PHOENIX CONTACT CHARX connect universal, Charging input for vehicles, for ..
$0.00
USD
3424 na sklade
Kľúčové špecifikácie
:
for installation in electric vehicles (EV)
Depth:
73 mm
Width:
73 mm
Coding:
4.7 kΩ (between PE and PP)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| for installation in electric vehicles (EV) | |
| Depth | 73 mm |
| Width | 73 mm |
| Coding | 4.7 kΩ (between PE and PP) |
| Height | 73 mm |
| Number | 3 (L1, N, PE) |
| General | A protective cap is supplied as standard for the AC contacts. |
| Altitude | 4000 m (above sea level) |
| Cable type | Single wires |
| Resistance | max. 1280 Ω ±5 K |
| Application | for charging electric vehicles (EV) with alternating current (AC) |
| Sensor type | PTC chain |
| Cable length | 2 m |
| Typ produktu | Vehicle charging inlet |
| Charging mode | Mode 2, 3 |
| Fixing screws | M6 |
| Mounting type | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Rated current | 32 A AC |
| Rated voltage | 250 V AC |
| Charging power | 8 kW |
| Product family | CHARX connect universal |
| Cable structure | 3 x 6 mm² |
| Color (Housing) | black (9005) |
| Insertion force | < 100 N |
| Attachment point | Sensor for the AC contacts |
| Cable resistance | ≤ 3.2 Ω/km |
| Charging current | 32 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | AC type 2 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Material (Housing) | Plastic |
| Single wire, color | OG |
| Ambient temperature | -40 °C ... 130 °C (Operation) |
| Color (Mating face) | black (9005) |
| Insulation resistance | > 200 MΩ |
| Single wire, material | Silicone |
| Standards/regulations | DIN˽EN 60738-1 |
| Mounting hole diameter | 6.80 mm (ø) |
| Temperature monitoring | AC contacts: PTC chain (DIN˽EN˽60738-1) |
| External cable diameter | 13.8 mm ±0.3 mm |
| Note number of positions | 4-pos. |
| Type of charging current | AC single-phase |
| Material (Contact surface) | Silver |
| Measuring range_resistance | 790 Ω ... 1420 Ω |
| Insertion/withdrawal cycles | > 10000 |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanical emergency release | available |
| Recommended measured current | ≤ 1 mA (Umax= 16 V DC) |
| Reverse current of the motor | max. 1.5 A |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Position of the locking actuator | left-side |
| Typical motor current for locking | 0.25 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1 s |
| Maximum voltage for locking detection | 12 V |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Possible power supply range at the motor | 9 V ... 16 V |
| Screws included in the scope of delivery | none |
| Degree of protection (Vehicle charging inlet) | IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
Popis produktu
CHARX connect universal, Vehicle input, for charging electric vehicles (EV) with alternating current (AC), AC type 2, IEC62196-2, 32 A / 250 V (AC), Single conductors, length: 2 m, locking actuator: 1
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
