Na sklade Horúci produkt
CHARX T1HBI12-DC200-3,0M1
CHARX T1HBI12-DC200-3,0M1 1436636 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for charg..
$0.00
USD
3348 na sklade
Kľúčové špecifikácie
:
for installation in electric vehicles (EV)
Depth:
117.6 mm
Width:
117.6 mm
Coding:
2.7 kΩ (between PE and CS)
Informácie o dodávateľovi
Produkty: 0
Zvyčajne sa odosiela do 2-3 pracovných dní
Zaručená kvalita
Rýchle doručenie
Technická podpora
Technické špecifikácie
| Parameter | Hodnota |
|---|---|
| for installation in electric vehicles (EV) | |
| Depth | 117.6 mm |
| Width | 117.6 mm |
| Coding | 2.7 kΩ (between PE and CS) |
| Height | 90 mm |
| Number | 5 (L1, N, PE, DC+, DC-) |
| General | A protective cap is supplied as standard for the DC contacts. |
| Altitude | 4000 m (above sea level) |
| Cable type | Single wires |
| Technology | Combined Charging System |
| Application | for charging with direct current (DC) |
| Coefficient | 3850 ppm/K |
| Sensor type | Pt 1000 |
| Cable length | 3 m |
| Typ produktu | Vehicle charging inlet |
| Charging mode | Mode 4 |
| Fixing screws | M6 |
| Mounting type | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Rated current | 200 A DC |
| Rated voltage | 1000 V DC |
| Charging power | 200 kW |
| Product family | CHARX connect universal |
| Cable structure | 2 x 70 mm² |
| Color (Housing) | black (9005) |
| Insertion force | < 100 N |
| Attachment point | 2 sensors for the DC contacts |
| Cable resistance | ≤ 0.259 Ω/km |
| Charging current | 200 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | CCS type 1 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Material (Housing) | Plastic |
| Single wire, color | OG |
| Ambient temperature | -40 °C ... 130 °C |
| Color (Mating face) | black (9005) |
| Insulation resistance | > 200 MΩ |
| Single wire, material | Silicone |
| Standards/regulations | DIN EN 60751 |
| Mounting hole diameter | 6.70 mm (ø) |
| External cable diameter | 17.9 mm ±0.3 mm |
| Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
| Note number of positions | 4-pos. |
| Type of charging current | DC |
| Material (Contact surface) | Silver |
| Insertion/withdrawal cycles | > 10000 |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanical emergency release | available |
| Recommended measured current | ≤ 1 mA (Umax= 16 V DC) |
| Reverse current of the motor | max. 1.5 A |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Position of the locking actuator | top center |
| Typical motor current for locking | 0.25 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1 s |
| Maximum voltage for locking detection | 12 V |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Possible power supply range at the motor | 9 V ... 16 V |
| Screws included in the scope of delivery | none |
| Degree of protection (Vehicle charging inlet) | IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
Popis produktu
CHARX connect, Vehicle inlet, for direct current (DC) charging, CCS type 1, IEC62196-2, IEC62196-3, 200 A / 1000 V (DC), length: 3 m (DC cables), locking actuator: 12 V, 4 poles, Front and rear wall m
Kľúčové vlastnosti
- Priemyselná kvalita
- V súlade s RoHS
- Certifikácia CE
- 1-ročná záruka
Dokumenty k produktu
Dátový list
Technické špecifikácie a údaje o výkone
Používateľská príručka
Návod na inštaláciu a obsluhu
